Electrical Equipment Requirements

It is a condition of our use of the facilities at CIM that electrical equipment used on their premises is PAT tested for safety. Without passing that test, the equipment cannot be used on their premises. In the past we have not been required to have items tested. However it is more than a bureaucratic exercise, it does help to improve safety at our events and afterwards when you take your equipment home. We have already found a number of items that were dangerous and a risk of electric shock or worse.

Equipment only needs to be tested if it does not carry a PAT sticker that is in date. You may get your equipment tested ahead of coming to our event or we have a facility to perform testing of equipment at the Weekend or Summer events. 

What’s covered?

Anything that can be plugged into a standard mains socket so things like:

  • Extension leads
  • Soldering irons
  • Angle poise (desk) lamps
  • Chargers for battery tools
  • Chargers for mobile phones / camera batteries
  • Charger for laptop / tablet for DCC control etc.

Can I bring my homemade controller, PSU etc?

Homemade mains equipment cannot be plugged in.

Home built, low voltage equipment can be used but must be powered by batteries or a commercially built power supply.

On Site PAT Testing

We do have the facility to perform PAT testing onsite, however please be aware that it may take some time to perform all the testing needed for everybody and that if items fail the test you will not be able to use them during the event. We do offer below some guidance as to things you can do ahead of time to give an indication that items will pass and to speed up the process.

We do make a nominal, per item, charge for PAT testing in order to cover our costs for the machine, its annual calibration and the certification process we have to go through to be eligible to do the testing.

What can I do in advance to save waiting?

  1. Only bring the equipment you need, not your entire workshop!
  2. Charge battery tools in advance so you don’t need the charger testing
  3. Use the USB outlets in your bedrooms to charge phones and tablets rather than bring USB power adapters
  4. Check the equipment you are bringing – see more details below
  5. Please let us know if you have items that need testing ahead of the weekend. We will cake you to forward details of the items to us in order to speed up the cataloguing process that we must undertake in order to maintain a register of items we have tested. This will reduce the admin delay and speed up the process for you and others waiting for equipment to be tested.

How do I check my equipment before I arrive?

  1. Visual inspection: The cable must be in good condition. Insulation must be secured by cable grippers etc
  2. Visual inspection: the plug must be correctly wiredLabeled wires
    (Old UK wiring, black: left, green: top, red: right)
  3. Visual inspection: the casing must be undamaged with no holes or cracks in the casing.
  4. Remove the paper label that new plugs often come with that describes how to wire the plug.
  5. Visual inspection: it must have a plug with insulation on the live and neutral pins.
    Non sleeved plug
    Plugs of this type must be replaced with ones that have insulation on the live and neutral pins as shown below. These are typically only found on older devices as UK regulations changed more than 30 years ago to require sleeved insulation on the live and neutral pins


  6. Sleeved earthSome counterfeit plugs that have sleeved earth pins have been circulating in the UK, these do not supply correct earthing protection and must be replaced.  Plugs with earth pins that are completely made of plastic can be used for class II, double insulated devices. These are commonly found on plugin power adapters for the likes of mobile phone chargers and other low voltages power supplies.
  7. Check that it is fitted with the correctly rated fuse for the equipment. (Note. It’s unlikely that this is 13amps). If you are not sure, leave the plug top off so we can look at it. Please label the plug with the fuse rating if it is not visible without removing the top.

PL16242 40.jpg All mains power plus should look like the one one shown here for any item that has a flexible cable to connect to the device.

We will have a small supply of replacement fuses and plugs available should yours fail to comply with current regulations.

 

Are you doing anything else?

Yes, we will use specialised equipment to check the electrical integrity of your equipment.

What happens if it fails?

You can not use items that fail PAT testing on site until it is fixed and passes a retest.